| Attributes |
|
|
| Name |
|
Name that should be shown beneath button. |
| KNX Address |
|
KNX group address for the value. |
| Data Format |
|
Here you select the Data Format of the value. You can choose from Lightscene, Temperature, Brightness, Energy, Power, Text, 1 byte, 2 byte, 2 byte float, 4 byte, 4 byte signed and 4 byte float. Default data format is Lightscene. |
| Memory Function |
|
This function is only available with Data Format Lightscene. If you set this function, a popup window will appear on long press of button, asking if you’d like to store the Lightscene. Note: The Lightscene is not stored in the App. If Store is pressed in popup, the App is sending store-telegram to given KNX address. |
| Value |
|
The value that should be sent. |
| Status indication |
|
This parameter is only available with Data Format Lightscene. If you check this option, the active Lightscene button is highlighted (orange bordered). There is a checkbox to set whether KNX Address should be polled or not. Note: If KNX Address should be polled, the address should be marked as readable in your ETS project. |
| Icon |
|
Select icon that should be shown on button. |
| More Settings |
|
|
| PIN Secured |
|
Check this option to avoid unauthorised access to this button. If the Secure PIN option is set, you need to enter a PIN before you could use the button. The PIN is set in Profile Settings and can also be easily changed later in iBEMI App Settings. |
